Filter
Top Products
173
USING THE MFC AS A PRINTER
If your application software does not support your custom paper size, select
the next larger paper size. Then adjust the print area by changing the right
and left margins in your application software.
When you use labels or transpariencies for overhead projectors, be sure to
use the manual feed slot.
Two-Sided Printing (Manual Duplexing)
The supplied printer drivers for Windows
®
3.1, 3.11, 95, 98 and Windows
NT
®
Workstation Version 4.0 enable manual duplex printing. (For more
information, see the Help screen for the printer driver.)
The MFC prints all the even-numbered pages on one side of the paper first.
Then, the Windows
®
driver instructs you (with a pop-up message) to reinsert the
paper. Before reinserting the paper, straighten it well, or you may get a paper
jam. Very thin or very thick paper is not recommended. If the paper “double-
feeds” (sends two sheets at once), hold the stack of paper except for the front
sheet while the paper is feeding.
CAUTION
When you use the manual duplex function, it is possible that a paper jam may
occur or the printer quality might not be satisfactory.
See
Acceptable
Paper
p. 18
See
Paper is
Jammed
in the
Multi-Purpose
Sheet Feeder
p. 198