Filter
Top Products
49
SETUP RECEIVE
Setting Multi-Function Link Pro Mode
(For MFC 4650, MFC 6650MC and MFC 7750 Only)
If you connect your MFC to your PC, you can receive faxes into your PC.
After completing all setup for Multi-Function Link Pro mode, you can turn
on Multi-Function Link Pro to reroute incoming faxes to your PC.
1
Press
Function
,
1
,
2
,
0
.
The screen displays
0.MF LINK
2
Press or to select ON (or OFF).
3
Press
Set
when the screen displays your selection.
4
Press
Stop
to exit.
Distinctive Ringing
This MFC feature lets you use the Distinctive Ringing subscriber service offered
by some telephone companies, which allows you to have several telephone
numbers on one phone line. Each phone number has its own Distinctive Ringing
pattern, so you’ll know which phone number is ringing. This is one way you
can have a separate phone number for your MFC.
Your MFC has a Distinctive Ringing function, allowing you to dedicate one
phone number just for receiving faxes. You’ll need to follow the directions
below to “register” the new Distinctive Ringing pattern, that was assigned
by the Telephone Company, so your MFC can recognize its incoming calls.
You can change or cancel the Distinctive Ringing pattern at any time. You
can switch it off temporarily, then turn it back on. When you get a new fax
number, be sure to you reset this function.
You can register only one Distinctive Ringing pattern with the MFC. Some
ringing patterns cannot be registered.
■
The MFC will answer only calls to its registered number.
■
To have your TAD answer only the main number, the MFC must be in
Manual Mode.
■
In FAX/TEL or FAX mode, the MFC will answer all numbers on the
phone line.
See
Using the MFC
with Your
Computer
p. 109