Filter
Top Products
39
Basic Receiving Operations
Select Answer Mode
There are four different answer modes for your MFC. You may choose the
mode that best suits your needs by pressing the Mode button repeatedly
until you have changed the FAX and FAX/TEL lights to the setting you
want to use.
NOTE: The lighted indicators mean = not selected = is selected and lit.
5
CHAPTER FIVE
Setup Receive
* In FAX/TEL mode you must set the Ring Delay and F/T Ring Time. If you have extension phones on
the line, set the Ring Delay to 4 rings.
When to use it
Use this mode when you are using a
computer modem on the same line or
if you receive very few fax messages.
You can also use this mode with
Distinctive Ringing.
For dedicated fax lines. You cannot
receive a voice call but you can call
out.
You cannot have an answering
machine on the same line, even if it is
on a separate jack on the same line.
You cannot use the telephone
company’s Voice Mail in this mode.
Mode
1. MANUAL
(manual receive)
2. FAX
(automatic receive)
3. FAX/TEL*
(fax and telephone)
Light How it works
You control the phone line and
must answer every call yourself.
The MFC automatically answers
every call as a fax.
MFC controls the line and
automatically answers every call.
If the call is a fax it will receive
the fax. If the call is not a fax it
will ring (double ring) for you to
pick up the call.
FAX
FAX/TEL
FAX
FAX/TEL
FAX
FAX/TEL
TAD
Msg CtrMsg Ctr
Msg CtrMsg Ctr
Msg Ctr
TA D
Msg CtrMsg Ctr
Msg CtrMsg Ctr
Msg Ctr
TA D
Msg CtrMsg Ctr
Msg CtrMsg Ctr
Msg Ctr