Filter
Top Products
71
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch,
Speed Dial, and Groups for Broadcasting of faxes.
Storing One Touch Dial Numbers
You can store 24 fax/phone numbers that you can dial by pressing one key
(and
Start
). To access numbers 13 to 24, hold down the Shift key. You also
can store names with these numbers. When you press a One Touch dial
location, the screen displays the name or number as the call is dialed.
One Touch keys are not the dial pad keys. They are the 12 keys (numbers
01–24) located to the right of the dial pad.
1
Press
Function
,
1
,
6
,
1
.
2
Press the One Touch key where you want to store a number. (One Touch key
01
has been pre-programmed for the Brother Fax-Back System (USA
only). You can override it if you wish.) The screen displays the location
you selected.
3
Enter a number (up to 20 digits). If you want to enter a pause in the
dialing sequence (for example, to access an outside line), press
Redial/Pause
as you’re entering digits. Pressing
Redial/Pause
enters a
3.5 second pause when the number is dialed, and a dash appears on the
screen.
4
Press
Set
. The screen prompts you to enter a name for this number.
NAME:
7
CHAPTER SEVEN
Setup Auto Dial
Numbers
See
One Touch
Dialing
p. 76
See
Changing
One Touch
and
Speed Dial
Numbers
p. 73