Filter
Top Products
92
CHAPTER ELEVEN
18
Click OK. Windows will restart automatically.
19
Reboot your PC. The MFL Unimessage Pro CD-ROM should auto
run and you will be presented with the screen bellow: —
Please follow the on screen prompts to install the Multi-Function Link
®
Unimessage Pro software which is described in the software’s Quick
Start Guide [supplied with the MFL Unimessage Pro CD-ROM].
If you have installed both the USB Drivers [as described in the chapter]
and the Resource Manager [which uses the parallel port], you may be
prompted with the message below. Click NO to use the software via the
USB port:—
After you install the Multi-Function Link
®
Unimessage Pro Software and
restart your PC, the MFC Remote Setup dialog box will be displayed on
your PC screen. MFC Remote Setup allows you to quickly set up your
MFC by taking advantage of the ease and speed of programming on your
PC. When you access this application, the settings on the MFC will be
displayed on your PC so you can change them as needed and then
download them to the MFC.