Filter
Top Products
4
CHAPTER FOUR
Initial
Setup
25
Getting Started
Setting the Dialling Mode (Tone/Pulse)
Your MFC is initially set to TONE. If you are using a PULSE dial line,
you can change the setting to PULSE by following the steps below.
1
Press Menu, 1, 1, 1. The screen prompts you to select TONE or
PULSE.
DIALLING:TONE
SELECT { } & SET
DIALLING:PULSE
SELECT { } & SET
2
Use or to select the dialling mode.
3
Press Set when the screen displays the dialling mode you want.
4
Press Stop to exit.
Setting the Date and Time
Your MFC displays the date and time, and prints it on every fax you
send.
In the event of a power failure, the MFC maintains date and time
information for several hours. All other settings remain unaffected.
1
Press Menu, 1, 1, 2. The screen prompts you to enter the year.
YEAR:XX
ENTER & SET