Filter
Top Products
5
INTRODUCTION
FF/Cont
When the LCD shows REMAINED
DATA, you can turn the machine
OFFLINE and then press this key to
print the data that is in the memory.
Also, it clears some operation and
machine errors.
Print Priority
Press this key if you want to print PC
data without interruption from incoming
faxes. Faxes will be stored and can be
printed later.
Test/Reset
This key is used to print a test page.
When it is pressed together with Shift,
it clears the data from the printer
memory, cancels an error status, and
then resets to the factory default
settings.
11
Dial Pad
Dials phone and fax numbers, and can
be used as a keyboard for entering
information into the MFC.
12
Copy Function Keys:
(Temporary Setting)
Enlarge/Reduce
This key press shows the next pre-stored
enlargement and reduction ratios: 25%,
50%, 75%, 87%, 93%, 100%, 120%,
125%, 141%, 150%, 200%, 400%,
AUTO, MANUAL. For more choices,
select MANUAL and use the dial pad to
type any percentage between 25% and
400%. AUTO sets the machine to
caluculate automatically the reduction
ratio that fits the size of your paper.
Contrast
Lets you temporarily adjust the
brightness of the whole image to be
lighter or darker.
Option
You can make sort multiple copies using
ADF,—OR—change the layout of
copies on the print media.
4in1 — Save paper by copying four
pages onto one page.
2in1 — Save paper or create a booklet
by copying two pages onto one page.
Poster — This option copies a
different portion of the original on each
of nine sheets of print media. Tape the
sheets together to get a copy that is nine
times the size of the original.
Document Type
Let’s you choose either AUTO, TEXT
or PHOTO.
Copy
Makes a copy.
13
Facsimile Keys:
Tel-Index
Lets you look up numbers stored in the
dialling memory.
Speed Dial
Lets you dial stored phone numbers by
pressing a two-digit number.
Redial / Pause
Redials the last number that was called.
Also inserts a pause in autodial
numbers.
R (Recall)
Use this key to gain access to an outside
line and/or to recall the operator or
transfer a call to another extension when
it is connected to a PABX.
Stop
Stops a fax, cancels an operation, or
exits from function mode.
Start
Starts an operation, such as sending a
fax.