Brother MFC-9870 All in One Printer User Manual


 
129
TROUBLESHOOTING AND MAINTENANCE
Open the file “win.ini” by using the “Notepad” application. You can find
the following statement in the [windows] section.
[windows]
run=C:/WINDOWS/SYSTEM/WPSIOMON
To disable this function, put a semicolon at the start of the sentence as
follows;
[windows]
;run=C:/WINDOWS/SYSTEM/WPSIOMON
Also, you can find the following statement in the [spooler] section.
[spooler]
QP.LPT1=wpslbq.dll
To disable this function, put a semicolon at the start of the sentence as
follows;
[spooler]
;QP.LPT1=wpslbq.dll
Then, open the file “system.ini” by using the “Notepad” application. You
can find the following statement in the [386Enh] section.
[386Enh]
device=wpscomd.386
device=wpsljvpd.386
WPSLPT1=1
To disable the function, put a semicolon at the start of the sentences as
follows;
[386Enh]
;device=wpscomd.386
;device=wpsljvpd.386
;WPSLPT1=1
You must restart Windows
®
to make these modification effective.
The modification disables the printer status reporting on your PC,
however, you will be able to use the machine with no further problems.
Graphics or Text is Missing when the Document is
Printed
This could be caused by your Display Driver software. Contact your
reseller and inquire about the latest Display Driver software. Another
solution is to change your Windows
®
Setup Display selection from the
current selection to the standard VGA or SVGA selection; contact your
reseller or Microsoft Support if you need help modifying your Windows
®
Display selection or installing new Display Driver software.