Filter
Top Products
39
SETUP SEND
Automatic Transmission
This is the easiest way to send a fax.
1
Insert the document in the feeder or on the glass platten.
2
Enter the fax number using One Touch, Speed Dial, Tel-index or the
dial pad.
3
Press Start.
Dual Access
If the document feeder is empty, you can place a document in the feeder,
set temporary settings, dial a number, and begin scanning the fax into
memory, even when the MFC is receiving a fax, sending a fax, or
printing a fax from memory. The screen displays the new job number and
how much memory is available.
If you get a MEMORY FULL message while scanning the first page of
a fax, press Stop to cancel a scan. If you get a MEMORY FULL
message while scanning in a subsequent page, you'll have the option to
press Start to transmit the pages scanned so far, or to press Stop to
cancel the operation.
The number of documents you can scan into memory varies with the data
they contain.
Real Time Transmission
When you have a MEMORY FULL message, the MFC cannot continue
scanning documents into memory before sending. However, you can
turn on REAL TIME TX.
1
Insert the document in the feeder or on the glass platten.
2
Press Menu, 1, 3, 8.
8.REAL TIME TX
3
To change the default setting, press or to select ON (or OFF)
and go to Step 6. ––OR–– For the next fax transmission only, press
or to select NEXT FAX ONLY.
REAL TIME TX:ON
SELECT { } & SET
4
Press Set.
5
For the next fax only, press or to select ON (or OFF).
6
Press Set.