Filter
Top Products
36
CHAPTER FIVE
Faxing from the Document Feeder
ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 50 pages, feeding
each one individually through the MFC. Use standard (75 g/m
2
) paper
when using the ADF. Always fan the pages well before placing them in
the feeder.
■ DO NOT use curled, wrinkled, folded, or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper, or fabric. (To fax this kind of document, see “Faxing
from the Glass Platten”.)
■ Make sure documents written with ink are completely dry.
■ Documents to be faxed must be from 14.7 to 21.6 cm wide, and from
12.7 to 35.6 cm long.
■ Insert documents FACE UP, TOP EDGE FIRST.
■ Adjust the paper guides to fit the width of your document.
■ Pull up the document stopper.
■ Stagger the pages. Then place them in the ADF, until you feel the
first page lightly touch the feed roller.
Document
is Face Up