Filter
Top Products
101
You can use the memory to store your most frequently used text files. The text remains in the
memory, along with its formatting, even after all characters are removed from the display
using the
Clear
function (holding down
c
and pressing
*
).
When each file is stored, it is given a number to make recalling it easier. Up to 100 text files or
as much as 2500 characters can be stored in the memory.
Since a copy of the stored text file is recalled when the
Recall
function is used, the text can be
edited or printed without changing the originally stored file. When a file is no longer needed
or more space is necessary, the
Memory delete
function can be used to delete it.
☞
When inserting new batteries, be sure to insert the new ones within five minutes of
removing the old ones, otherwise any text files stored in the memory will be lost (unless
the machine is plugged into an electrical outlet with the AC adapter).
STORING TEXT
To store a text file:
1
Do either of the following:
• Rotate
+
until
08/21
MEMORY
is displayed, and then press
+
. Then, rotate
+
until
STORE
is displayed, and then press
+
.
OR
• Hold down
c
and press
7
.
The message “STORE” appears in the display with the currently selected file number.
☞
If 2500 characters have already been stored, the error message “MEMORY FULL!”
appears in the display. If this occurs, an existing text file must be deleted before the
new one can be stored. To quit the
Store
function without storing the text, hold
down
c
and press
7
(or press just
*
).
2
R
otate
+
(OR press
h
or
e
) until the desired file number where you wish to store the text is displayed.
3
Press
+
(OR press
r
). The text is stored under the selected file number and the
text previously shown in the display reappears.
☞
If a file is already stored under the selected file number, the message “OVER-
WRITE?” appears in the display and you must decide whether or not to overwrite it
(delete it from the memory and store the new one).
To overwrite the stored file with the new one:
●
Press
+
(OR press
r
) to delete the previously stored file and store the new one
under the selected number.
☞
To go back and choose another file number without overwriting the text file, press
*
, and then select a different file number.
MEMORY FUNCTIONS