Filter
Top Products
76
EXAMPLE
The character size can be adjusted using both the
Size
and
Width
functions. Since the charac-
ter size that can be used depends on the width of the tape, the following table shows the char-
acter sizes that can be used with each tape width.
The default size setting is
AUTO
and the default width setting is
MEDIUM
. The currently
selected size setting is always shown by the indicators above the display. In addition, when a
width setting other than
MEDIUM
is selected, the
Width
indicator comes on.
To select the FONT 2 font setting:
1
While holding down
c
, press
1
once,
and keep
c
held down.
2
While still holding down
c
, continue pressing
1
until
FONT 2
is displayed.
3
Release
c
.
Tape widths
Sizes (in points)
6 mm
6, 9, 12
9 mm 6, 9, 12, 18
12 mm 6, 9, 12, 18, 24
18 mm 6, 9, 12, 18, 24, 36
24 mm 6, 9, 12, 18, 24, 36, 48
1
FONT
Caps
Alt
2
FONT
Caps
Alt
A
SIZE & WIDTH FUNCTIONS