Filter
Top Products
25
0
A dialog box appears, allowing you to check
the installation.
Check that the installation will be performed
as desired, and then click “Install”.
A
After P-touch Editor is installed, a dialog box
appears, indicating that the installation is fin-
ished.
Click “Done”, and then restart the computer.
INSTALLING THE P-TOUCH QUICK EDITOR SOFTWARE
The P-touch Quick Editor software provides quick access to the more simple label-designing
features for easy text input and instant printing of labels. Install the P-touch Quick Editor soft-
ware onto a Macintosh as described below.
1
With the P-touch and the Macintosh turned off, connect the P-touch to the computer
using the enclosed USB interface cable as described on page 6.
Be sure to leave the
P-touch turned off.
2
Turn on the Macintosh.
3
Insert the enclosed CD-ROM into the computer’s CD-ROM drive.
4
Double-click the Mac OS 9 folder to open it.
With Mac OS 8.6 to 9.X: