Filter
Top Products
106
Error Message
Cause Remedy
1 BAR CODE
PER BLOCK!
This message appears if a bar code
has already been added to the block
when you try to use the
Bar code
function.
Limit the number of bar codes in
a block to one.
4 DIGIT
MIN.!
This message appears when less than
the minimum four digits are entered
as bar code data.
Enter a minimum of four digits
before pressing
r
.
5 BLOCK
LIMIT!
This message appears if five blocks
already exist when you hold down
c
and press
r
.
Limit the number of blocks in
the text to five.
7 LINE
LIMIT!
This message appears if seven lines
already exist when you press
r
.
Limit the number of lines to
seven.
BATTERIES
WEAK!
This message appears when the
installed alkaline batteries become
weak.
Replace the batteries or use the
AC adapter.
BUFFER
EMPTY!
• This message appears if you hold
down
c
and press
T
, but
no text has been entered in the dis-
play.
• Enter some text before starting
the function.
• This message appears if you try to
print or store a text file in the
memory, but no text has been
entered in the display.
• Enter text before printing or
storing.
BUFFER
FULL!
This message appears if you try to
enter a character, symbol, return or
space after 255 characters have
already been entered.
Delete some existing text so that
more text can be entered.
CASSETTE
CHANGED!
This message appears if the tape cas-
sette is changed while the P-touch is
receiving data from the computer.
Cancel the print job, install the
correct tape cassette, and then
try printing again.
ERROR MESSAGE LIST