Brother 2450DX Printer User Manual


 
108
LENGTH
LIMIT!
This message appears if the text is
longer than 1 metre when you try to
print.
Shorten the text to less than 1
metre before trying to print.
This message appears if the
Length
function is used to set a label
length that is less than 4.0 cm or
more than 30.0 cm.
Set the label length between
4.0 cm and 30.0 cm.
This message appears if the
Tab
Length
function is used to set a tab
length that is more than 30.0 cm.
Set the tab length so that it is
less than 30.0 cm.
LINE
LIMIT!
This message appears if the number
of lines in the text is greater than the
maximum number of lines possible
for the installed tape.
Reduce the number of lines or
install a tape of greater width.
MEMORY
FULL!
This message appears if you try to
store a text file after 2500 characters
have already been stored in the
memory.
Delete an unwanted file to make
room for the new one.
NO
FILES!
This message appears if you try to
recall or delete a text file from the
memory when none are stored.
Store a text file first.
OVERFLOW
This message appears if the calcu-
lated Euro conversion result exceeds
10 digits.
Enter a smaller value.
REPLACE
BATTERIES!
This message appears if the installed
alkaline batteries are about to run
out.
Replace the batteries or use the
AC adapter.
ROM
PROBLEM!
This message appears if there is a
problem with the machine’s read
only memory.
Turn off the machine, and then
while holding down
c
and
R
, turn the machine back on.
Contact your service representa-
tive.
SET 24mm!
This message appears if a 24-mm-wide
tape cassette is not installed when an
Auto Format
layout for a 24-mm-wide
tape is selected.
Install a 24-mm-wide tape cas-
sette.
Error Message Cause Remedy