Brother 2450DX Printer User Manual


 
56
EXAMPLE
This function allows you to separate sections of a line of text by adding tabs. This enables you
to create perfectly aligned columns without having to type in several spaces. All tabs have the
same length and are measured from either the beginning of the line or the previous tab if there
is more than one. The tab length can be set between 0.0 and 30.0 cm.
The text can contain no more than 50 tabs. If 50 tabs have already been added to the
text when
Q
is pressed, the error message “TAB LIMIT!” appears.
To set the tab length:
1
Rotate
+
until
09/21 TAB LENGTH
is displayed, and then press
+
(OR hold down
c
and press
W
once). The current tab length is displayed.
2
Rotate
+
(OR press
h
or
e
) until the desired length is displayed, or use the
number keys to type in the length.
3
Press
+
(OR press
r
).
To add a new block:
Hold down
c
and press
r
once.
1:
_
2:
MB030201
Caps
Alt
TAB FUNCTION
2:
MB030201_
1:
Part
No.
Caps
Alt