Filter
Top Products
8 - 4 DLC PRINTING
YL4US_FAX2800MFC4800-FM5.5
Windows
®
NT 4.0 Printer Setup
Log into Windows
®
NT with administrative privileges. From the Start
menu, select Settings and then Printers.
1
Select
Add Printer
(If you have already installed a Brother printer
driver, double click the printer driver that you wish to configure and
then select
Printers/Properties
, select the
Ports
tab and
continue from Step 4 (ignoring steps 9-11 about installing the
correct driver)).
2
Select My Computer and then click Next.
3
Select Add a Port.
4
Select Hewlett-Packard Network Port and then click New
Port.
5
A list of available print server MAC addresses (Ethernet
addresses) appears in the larger box under Card Address.
Select the address of the desired print server (you can see the
Ethernet address on the printer configuration page).
6
The selected print server address will then appear in the smaller
box under Card Address.
7
Type in any desired name for the port (the name must not be the
name of an existing port or DOS device, such as LPT1) and click
OK then on the Printer Ports screen, click Close.
8
The name you selected in the above step will appear as a
checked port in the list of available ports. Click Next.
9
Select the correct driver. Click Next.
10
Give a name to the printer. If desired, select the printer as the default.
11
Select Shared or Not Shared. If shared, specify the share
You can find the node name and MAC address by printing out the
printer configuration page. Refer to the
Quick Setup
Guide for
information on how to print the configuration page on your print
server.