Filter
Top Products
9 - 2 LAT NETWORK CONFIGURATION
YL4US_FAX2800MFC4800-FM5.5
VMS LAT Host Configuration
The configuration process requires that you have system manager
privileges. Before starting the LAT configuration process, you must
first make sure that LAT has been started on your system. If you are
currently using terminal servers on your network, then LAT has
probably already been activated. If LAT is not started, you need to
execute the following command before proceeding:
@SYS$STARTUP:LAT$STARTUP
1
Before creating a print queue, you will need to determine the
following:
n The VMS queue name. This can be any unique name. (Do
a SHOW QUEUE command at the VMS prompt to list the
existing queues).
n The LAT application port. The name of this port is LTAxxx,
where xxx is any unused number (do a SHOW PORT
command in the VMS LATCP program to see the existing
ports).
n The print server node name and port name . The default
node name is BRN_xxxxxx, where xxxxxx is the last six
digits of the MAC address (Ethernet address), for example,
BRN_310107). You can see the name of your print server by
printing out a configuration page.
You can find the node name and MAC address by printing out the
printer configuration page. Refer to the Quick Setup Guide for
information on how to print the configuration page on your print
server.
If you wish to use a different node name, use the BRAdmin
application or a web browser to change the name.