Filter
Top Products
12 - 10 TCP/IP CONFIGURATION
YL4US_FAX2800MFC4800-FM5.5
On VMS systems, the connection is made as shown in the following
example:
$ MCR NCP
NCP>CONNECT VIA QNA-0 PHY ADD 00-80-77-31-01-07
On ULTRIX systems, you would execute commands similar to the
following example:
# addnode BR -c qna-0 -h 00-80-77-31-01-07
# ccr BR
On a NetWare networks, you can use the BRCONFIG utility which
are included with every print server.
If you are using the remote console, you will get the message
Console connected (VMS) or Connection established
(BRCONFIG) or Remote console reserved (ULTRIX). Press
RETURN and enter the default password access in response to the
"#" prompt (it will not echo).
You will be prompted for a user name. Enter anything in response to
this prompt.
You will then get the Local> prompt. Type SET IP ADDRESS
ipaddress, where ipaddress is the desired IP address you wish
to assign to the print server (check with your network manager for the
IP address to use). For example:
Local> SET IP ADDRESS 192.189.207.3
You will now need to set the subnet mask by typing SET IP SUBNET
subnet mask, where subnet mask is the desired subnet mask
you wish to assign to the print server (check with your network
manager for the subnet mask to use). For example:
Local> SET IP SUBNET 255.255.255.0