Filter
Top Products
LAT NETWORK CONFIGURATION 9 - 5
YL4US_FAX2800MFC4800-FM5.5
PATHWORKS for DOS Configuration
To configure the print server for PATHWORKS for DOS:
1
Create a VMS queue as previously described.
2
Run PCSA_MANAGER on the VMS system.
a
Type MENU to get the PCSA menu.
b
Select SERVICE OPTIONS
c
Select ADD SERVICE (do not use the ADD PRINTER
QUEUE option as this will add a PCL printer reset that will
affect PostScript printing.
d
Select PRINTER SERVICE.
e
Enter service name (pick a name).
f
Enter VMS queue name (previously defined).
g
Enter VMS form name (use the default if you do not have a
specific form defined).
3
Perform the following steps on the PC:
a
If you are using DOS, type the command USE
LPTx:\\node\service at the DOS prompt, where x is the
PC parallel port number, node is the DECnet node name and
service is the service name picked previously. For
example:
USE LPT1:\\VAX\LASER
You may delete this print service by typing LATCP at the C:> prompt
and then entering the command DELETE LPT1:
b
If you are using Windows
®
3.1x, make sure that you have
selected DEC PATHWORKS as the network under the
Windows
®
Setup icon.
c
Then click on the Print Manager icon, select Options and
then Printer Setup.