Filter
Top Products
TCP/IP PRINTING 2 - 14
YL4US_FAX2800MFC4800-FM5.5
6
You should now be able to print. To test the queue, type the
following from either the OS/2 command prompt or from a DOS
workstation:
7
COPY C:\CONFIG.SYS \\servername\alias
8
Where servername is the name of the file server and alias is
the alias name that you specified during this configuration
process. This should print the CONFIG.SYS file on the printer.
Note that if you selected a binary service as the LPD printer
name, the lines will be staggered; don't worry about this
because normal DOS, Windows
®
, and OS/2 applications will
print OK.
9
The Brother print server will appear as a standard OS/2 printer
to application programs. To make the print server operate
transparently with DOS programs, execute the following
command on each workstation:
10
NET USE LPT1: \\servername\alias
11
This will make the printer appear to the software as a printer that
is directly connected to the parallel port of the workstation.
Other Sources of Information
1
Visit http://solutions.brother.com/ for more information on
network printing and for documents on the IPP protocol and how
to configure a Windows
®
2000/XP/95/98/Me System.
2
Refer to chapter 12 of this user guide to learn how to configure
the IP address of the printer.