Filter
Top Products
Troubleshooting and routine maintenance
119
C
No Response/Busy The number you dialled does not
answer or is busy.
Verify the number and try again.
No Toner The toner cartridge or the drum
unit and toner cartridge assembly
is not installed properly.
Re-install the toner cartridge or the drum unit
and toner cartridge assembly.
No Tray The paper tray is not completely
closed.
Close the paper tray properly.
Out of Memory The machine’s memory is full. Fax sending or copy operation in
progress
Do one of the following:
Press Start to send or copy the scanned
pages.
Press Stop/Exit and wait until the other
operations in progress finish, and then try
again.
Clear the data from the memory. (See
Out of memory message on page 39 or
page 75.)
Print operation in process
Do one of the following:
Reduce print resolution. (See Advanced
tab in the Software User’s Guide on the
CD-ROM.)
Clear the faxes from the memory. (See
Out of memory message on page 75.)
Output Tray Full The ADF output tray has reached
its maximum capacity.
Remove the scanned pages from the ADF
output tray. If you want to scan the remaining
pages of your documents, dial the fax
number (if you are sending a fax) and press
Start.
Print Unable XX
(XX = Enter Code)
The machine has a mechanical
problem.
Disconnect the machine from the power for
several minutes, then reconnect it. (The
machine can be turned off for up to 60 hours
without losing faxes stored in the memory.
See Transferring your faxes or Fax Journal
report on page 121.)
Protected Device The protect switch of the USB
Flash memory drive is on.
Turn off the protect switch of the USB Flash
memory drive.
Rename the File There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Error Message Cause Action