Filter
Top Products
General Setup
25
3
Ecology features 3
Toner Save 3
You can save toner using this feature. When
you set Toner Save to On, prints appear
lighter. The default setting is Off.
a Press Menu, 1, 4, 1.
b Press a or b to choose On or Off.
Press OK.
c Press Stop/Exit.
Note
We do not recommend Toner Save for
printing Photo or Greyscale images.
Sleep Time 3
The Sleep Time setting can reduce power
consumption by turning off the fuser while the
machine is idle.
You can choose how long the machine must
be idle before it goes into sleep mode. When
the machine receives a fax, computer data, or
makes a copy, the timer will be reset. The
default setting is 05 minutes.
While the machine is in sleep mode the LCD
will display Sleep. When printing or copying
in sleep mode, there will be a short delay
while the fuser warms up.
a Press Menu 1, 4, 2.
b Enter the length of time the machine is
idle before entering sleep mode.
Press OK.
c Press Stop/Exit.
Note
To turn off sleep mode, press Secure and
Job Cancel at the same time in step b.
Press a or b to choose Off. Press OK.
LCD Contrast 3
You can change the contrast to make the
LCD look lighter or darker.
a Press Menu, 1, 6.
b Press b to make the LCD lighter. Or,
press a to make the LCD darker.
Press OK.
c Press Stop/Exit.