Filter
Top Products
General Setup
23
3
Tray Use in fax mode 3
You can change the default tray that the
machine will use for printing received faxes.
When you choose Tray#1 Only or
MP Only, the machine pulls the paper only
from that tray. If the selected tray is out of
paper, No Paper will appear on the LCD.
Insert the paper in the empty tray.
When you choose T1>MP, the machine pulls
paper from Tray #1 until it is empty and then
from the MP tray. When you choose MP>T1,
the machine pulls paper from the MP tray until
it is empty and then from Tray #1.
Note
• You can use four sizes of paper for
printing faxes: A4, Letter, Legal or Folio.
When a suitable size is not in any of the
trays received faxes will be stored in the
machine’s memory and Size Mismatch
will appear on the LCD. (For details, see
Error and maintenance messages
on page 117.)
• If the tray is out of paper and received
faxes are in the machine’s memory,
No Paper will appear on the LCD. Insert
paper in the empty tray.
a Press Menu, 1, 5, 2.
b Press a or b to choose Tray#1 Only,
MP Only, MP>T1 or T1>MP.
Press OK.
c Press Stop/Exit.
Tray Use in print mode 3
You can change the default tray the machine
will use for printing from your computer.
a Press Menu, 1, 5, 3.
b Press a or b to choose Tray#1 Only,
MP Only, MP>T1 or T1>MP.
Press OK.
c Press Stop/Exit.
Note
• The setting in the printer driver will take
priority over the setting made on the
control panel.
• If the control panel is set to Tray#1 Only
or
MP Only
and you choose Auto Select
in the printer driver, the machine pulls the
paper from that tray.