Filter
Top Products
Chapter 4
28
Turning Memory Security
on/off 4
If you enter the wrong password, when
following the instruction below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Memory Security on
a Press Menu, 1, 7, 1.
b Press a or b to choose Set Security.
Press OK.
c Enter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Note
If there is a power failure the data will stay
in memory for up to 4 days.
Turning Memory Security off
a Press Menu.
Enter the registered four-digit password.
Press OK.
b Memory Security is automatically turned
off and the LCD shows the date and
time.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in Secure
Mode until the registered password is
entered.
Setting Lock 4
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the password
stored in the machine. Please call your
administrator or Brother Call Center.
While Setting Lock is On, you cannot change
the following settings without a password:
Date/Time
Station ID
Address Book
Mode Timer
Paper Type
Paper Size
Volume
Ecology
Tray Use
LCD Contrast
Document Scan
Setting Lock
Memory Security
Dial Restriction