Filter
Top Products
Chapter 12
74
Tray selection
You can change the Tray Use only for the
next copy.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Options.
Press a or b to choose Tray Select.
Press OK.
e Press a or b to choose the MP>T1,
T1>MP, #1(XXX) or MP(XXX).
Press OK.
f Press Start.
Note
To change the default setting for Tray
Select, see Tray Use in copy mode
on page 22.
Duplex (2-sided) copying 12
If you want to use the duplex copy feature,
load your document in the ADF.
If you get an Out of Memory message
while you are making duplex copies, try
installing extra memory. (See Out of memory
message on page 75.)
Duplex Copy (long edge flip)
1sidedi2 sided L
Portrait
Landscape
a Make sure you are in Copy mode .
b Unfold the ADF output tray and place
your document face down in the ADF
input tray.
c Enter the number of copies (up to 99)
using the dial pad.
d Press Duplex and a or b to select
1sidedi2sided L.
Press OK.
e Press Start to copy the document.
1
2
1
1
2
1
1
2
1
2