Filter
Top Products
14-3
SETTING UP MFC WITH YOUR COMPUTER
Computer
Connecting the MFC to the Computer
When you connect the MFC to your computer, you must use the
included Brother bi-directional IEEE-1284 compliant parallel
cable.
1
Unplug the MFC power cord from the electrical outlet before
connecting the parallel interface cable.
2
Make sure the computer is turned off and unplugged from the
electrical power before you connect the interface cable.
3
Connect the parallel interface cable to the parallel interface
port of the MFC and secure the wire clips.
4
Connect the interface cable to the printer port of the computer
and secure with the two screws.
For the location of your computer’s parallel printer port, see the
User’s Guide for your computer.
5
Before you plug in your computer and turn it on, plug in the
electrical cord of your MFC.