Filter
Top Products
SETUP AUTO DIAL NUMBERS
8-1
Storing Numbers
8
Setup Auto Dial
Numbers
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One
Touch, Speed Dial, and Groups for Broadcasting of faxes.
Storing One Touch Dial Numbers
You can store 24 fax/phone numbers that you can dial by pressing
one key. You also can store names with these numbers. When you
press a One Touch dial location, the screen displays the name or
number as the call is dialed.
One Touch keys are not the dial pad keys. They are the 12 keys
(numbers 01–24) located to the right of the dial pad. Numbers
13-24 are accessed by holding down shift while you press the
appropriate One Touch key.
1
Press
Function
,
1
,
5
,
1
.
2
Press the One Touch key where you want to store a number.
To store a number in locations 13–24, press shift (
Shift
), then
press a key. (One-Touch key
01
is pre-programmed for Brother
Fax-Back System, USA only. You can override it if you wish.)
The screen displays the location you selected.
3
Enter a number (up to 20 digits) and press
Set
.
If you want to enter a pause in the dialing sequence (for
example, to wait for an “outside line”), press
Redial/Pause
as
you’re entering digits. Pressing
Redial/Pause
enters a 3.5 second
pause when the number is dialed, and a dash appears on the
screen. If you need to store a pause longer than 3.5 seconds,
press
Redial/Pause
two or more times.
NAME:
See
One Touch
Dialing
p. 9-2