Filter
Top Products
INITIAL SETUP
5-2
Setting Date and Time
Your MFC displays the date and time, and prints it on every fax
you send.
In the event of a power failure, you may have to reset the date and
time. All other settings remain unaffected.
1
Press
Function
,
1
,
1
,
2
.
ENTER YEAR:XX
2
Enter the last two digits of the year and press
Set
.
ENTER MONTH:XX
3
Enter two digits for the month (for example, enter 09 for
September, or 10 for October) and press
Set
.
ENTER DAY:XX
4
Enter two digits for the day (for example, 06) and press
Set
.
ENTER TIME:XX:XX
5
Enter the time in 24-hour format (for example, enter 15:25 for
3:25 PM) and press
Set
.
6
Press
Stop
. The screen now displays the date and time you set,
and displays it whenever the MFC is standing by.
Setting Station ID
You can store your name, fax number, and telephone number to be
printed on all fax pages that you send.
1
Press
Function
,
1
,
1
,
3
.
FAX:
2
Enter your fax number (up to 20 digits) and press
Set
.
TEL:
3
Enter your telephone number (up to 20 digits) and press
Set
. If
your telephone number and fax number are the same, enter the
same number again.
NAME:
4
Use the dial pad to enter your name (up to 20 characters) and
press
Set
.
5
Press
Stop
. The screen returns to the date and time.
See
Entering Text
pp. 5-3–5-4
See
Composing
Electronic
Cover Page
p. 7-5