Filter
Top Products
27
33
Unit Security Setting
Unit Security Setting
Setting a Password to the Security Folder
1 Click the security folder ( ) if the password has not been configured.
• The password can also be configured from [Tools] J [Password setting/change] after
selecting the top ( ) or main ( ) folder.
¨The [Password setting] dialog displays.
2 Enter a four digit password in the "Password" field.
• Configure the password using one-byte numeric characters: 0-9. Alphabet characters or
symbols cannot be used.
3 Enter the password into the "Confirm password" field.
4 Click [OK].
• The Security folder opens and changes to .
A password needs to be configured to use the Security folder.
The password configured in this procedure is used by the unit to open the Security
folder.
Set the password as follows.
• If the [Password setting] dialog does not display when the security folder is clicked,
the password has already been configured.
• Select the Security folder ( ) already configured with a password and select
[Tools] ➞ [Password setting/change] in the Menu to display the [Password change]
dialog. Refer to "Changing the Password to the Security Folder" on page 29.