Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 97
cause a loop.
The syntax for this command is:
set port spantree cost [module/port] [value]
Example:
set port spantree priority
User level: read-write, admin.
Use the set port spantree command to set the Spanning Tree priority level of a
port. This value defines the priority of a port to be blocked in case two ports with
the same costs cause a loop.
The syntax for this command is:
set port spantree priority [module/port] [value]
Example:
set port speed
User level: read-write, admin.
Use the set port speed command to configure the speed of a port or range of
module/port Module number/port number.
value Number representing the cost. The cost level is set from 1
to 65535. A lower cost (lower value) specifies precedence
of a port to forward traffic.
P460-1> set port spantree cost 4/2 4096
port 4/2 spantree cost is 4096
module/port Module number/port number.
value Number representing the priority of the port. The priority
level is from 0 to 255, with 0 indicating high priority and
255 indicating low priority. A port with a lower priority
will be blocked.
P460-1# set port spantree priority 3/4 128
port 3/4 spantree priority is 128