Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
82 Avaya P460 Reference Guide
set license
User level: read-write, admin.
Use the set license command to activate a licensed feature on a specific P460
chassis.
For a full description of the Feature License and the installation procedure please
refer to the Installation Guide provided with the Feature License.
The syntax for this command is:
set license [license] [featureName]
Example:
set logout
User level: read-write, admin.
Use the set logout command to set the time in minutes until the system
automatically disconnects an idle session.
The syntax for this command is:
set logout [timeout in minutes]
license The license number
featureName The name of the feature, currently either smon or routing.
The default feature is smon.
P460-1# set license 026 9b8 216 908 dea f4d layer-3
Layer-3 Features had been enabled on this chassis.
timeout in
minutes
Time until the system automatically disconnects an idle
session.
• Setting the value to 0 disables the automatic disconnection
of idle sessions
• The default value is 15 minutes.