Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
20 Avaya P460 Reference Guide
The syntax for this command is:
clear port static-vlan [module/port range][vlan num]
Example:
clear radius authentication server
User level: read-write, admin.
Removes a primary or secondary RADIUS authentication server.
The syntax for this command is:
clear radius authentication server[{primary|secondary}]
Example:
clear snmp trap
User level: read-write, admin.
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
module/port range Port range
vlan num The VLAN to unbind from the port
P460-1# clear port static-vlan 3/10 5
VLAN 5 is unbound from port 3/10
primary Remove primary RADIUS server
secondary Remove secondary RADIUS server
P460-1(super)# clear radius authentication server secondary
rcvr_addr IP address or IP alias of the trap receiver (the SNMP management
station) to clear
all Keyword that specifies every entry in the SNMP trap receiver
table