Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
164 Avaya P460 Reference Guide
show port vlan-binding-mode
User level: read-only, read-write, admin.
Use the show port-vlan-binding command to display port vlan binding mode
information.
The syntax for this command is:
show port vlan-binding-mode [module[/port]]
Example:
show ppp authentication
User level: read-only, read-write, admin.
Use the show ppp authentication command to display the authentication
method used for PPP sessions.
The syntax for this command is:
show ppp authentication
module Number of the module (3-6). If you do not specify a number,
the ports on all the modules are shown.
port
(Optional)
Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
P460-1> show port vlan-binding-mode
port 2/1 is statically bound
port 2/2 is statically bound
port 2/3 is statically bound
port 2/4 is statically bound
port 2/5 is statically bound
port 2/6 is statically bound
port 2/7 is statically bound
port 2/8 is statically bound
port 2/9 is statically bound
port 2/10 is statically bound