Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
158 Avaya P460 Reference Guide
Show Port Output Fields
show port auto-negotiation-flowcontrol-advertisement
User level: read-write, admin.
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement [module/port]
[mode]
Description
Port Switch and port number
Name Name of port
Status Status of the port (connected, faulty, disabled)
Vlan VLAN ID of the port
Level Priority level of the port (0-7)
Neg The autonegotiation status of the port (enabled, disabled)
Dup Duplex setting for the port (full, half)
Speed Speed setting for the port (10, 100, 1000)
Type Port type, for example:
10/100BASE-TX, GBIC_SX, GBIC_LX, GBIC_not present,
GBIC_unknown
module Number of the module
port Number of the port
mode no-flowcontrol, asym-tx-only, sym-only or sym-and-asym-rx