Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 111
set snmp trap <rcvr_addr> {enable|disable} {all|config|fault|...}
Example:
To enable SNMP ConfigChange traps to a specific manager:
Example:
To enable all traps to a specific manager:
Example:
To disable SNMP config traps to a specific manager:
Example:
To add an entry in the SNMP trap receiver table with default:
enable Activate SNMP traps
disable Deactivate SNMP traps
all (Optional) Specify all trap types
config (Optional) Specify the ConfigChange trap from the TRAP-MIB.
fault (Optional) Specify the Fault trap from the TRAP-MIB.
rcvr_addr IP address or IP alias of the system to receive SNMP traps
P460-1# set snmp trap 192.168.173.42 enable config
SNMP config change traps enabled.
P460-1# set snmp trap 192.168.173.42 enable all
SNMP all traps enabled.
P460-1# set snmp trap 192.168.173.42 disable config
SNMP config traps disabled.
P460-1# set snmp trap 192.168.173.42
SNMP trap receiver added.