Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 167
Example:
show rmon event
User level: read-only, read-write, admin.
Use the show rmon event command to show the parameters of an Event entry
defined by the rmon event command on Page 68 or using the P460 Manager.
The syntax for this command is:
show rmon event [<Event Index>]
Example:
P460-1> show rmon alarm 1026
alarm
alarm 1026 is active, owned by amir
Monitors ifEntry.1.1026 every 60 seconds
Taking delta samples, last value was 1712
Rising threshold is 10000, assigned to event # 1054
Falling threshold is 10, assigned to event # 1054
On startup enable rising or_falling alarms.
Alarm Index History index defined using rmon event command or the
P460 Manager
P460-1> show rmon event 1026
event
Event 1054 is active, owned by amir
Description is event for monitoring amir's co
Event firing causes log and trap to community public,last
fired 0:0:0