Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
34 Avaya P460 Reference Guide
necessary.
Use the ip access-list-copy command to copy a configured source policy list
to a destination policy list.
The syntax for this command is:
ip access-list-copy <source-list> <destination-list>
Example:
ip access-list-name
User level: read-write, admin.
• You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
necessary.
Use the ip access-list-name command to set a name for a policy list.
The syntax for this command is:
ip access-list-name <policy-list-number> <name>
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
ip access-list-owner
User level: read-write, admin.
• You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
<source-list> integer (100...199)
<destination-list> integer (100...199)
Router-1(configure)# ip access-list-copy 100 101
<policy-list-number> integer (100...199)
<name> list name
Router-1(configure)# ip access-list-name 101 morning