Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 137
Example:
show ip route (Layer 3)
User level: read-only, read-write, admin.
Use the show ip route command to display information about the IP unicast
routing table.
The syntax for this command is:
show ip route
show ip route best-match
User level: read-only, read-write, admin.
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
P460-1> show ip route
Destination MaskGateway
------------- --------------------------
2.2.2.2 255.255.255.01.1.1.2
2.2.2.2 255.255.0.01.1.1.3
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
0.0.0.0 0.0.0.00.0.0.0
Router-1> show ip route
Network Mask Next-Hop Interface Source
---------------- ---------------- ---------------- ----------- -------
149.49.77.0 255.255.255.0 149.49.77.70 inband LOCAL
0.0.0.0 0.0.0.0 149.49.77.1 inband STATIC
dst addr IP address