Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 109
Example 2 – if there is a module in the slot::
set snmp community
User level: read-write, admin.
Use the set snmp community command to set or modify the switch’s SNMP
community strings.
The syntax for this command is:
set snmp community <read-only | read-write | trap> [community
string]
Example:
P460-1> set slot power 4 up
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Module in slot 4 is shutting down.
Attaching network interface lo0... done.
Welcome to P460
SW version 1.0.1
Login:
P460-1> set slot power 4 up
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? Y
Module in slot 4 is turning on
Welcome to P460
SW version 1.0.1
Login:
P460-1# set snmp community read-only read
SNMP read-only community string set