Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
24 Avaya P460 Reference Guide
L To use this command, you need to have an active TFTP server, and to create a
file into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server..
The syntax for this command is:
copy tftp EW_archive <filename> <ip>
Example:
copy tftp l2-config
User level: read-write, admin.
Use the copy tftp l2-config command to update the Layer 2 parameters in the
current NVRAM running configuration from a file via TFTP.
L To use this command, you need to have an active tftp server, and to create a file
into which to download the data.
If Avaya MultiService Network Manager is running, you do not require an
additional TFTP server.
The syntax for this command is:
copy tftp l2-config <filename> <ip>
filename P460 Manager image file name (full path)
ip The IP address of the host
P460-1# copy tftp EW-archive c:\P460\switch1.cfg
192.168.49.10
filename file name (including full path)
ip IP address of the host