Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
122 Avaya P460 Reference Guide
settings.
The syntax for this command is:
show broadcast storm control
Example:
show cam
User level: read-only, read-write, admin.
Use the show cam command to display the CAM table entries for a specific
module and port.
Note: MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
By Module and Port
The syntax for this command is:
show cam [module[/port]]
P460-1> show broadcast storm control
Broadcast Threshold
Storm Control
---------------- ------------
disable 500
mac-addr MAC address
module
(Optional)
Number of the module (3-6). If you do not specify a number, all
modules are shown.
port
(Optional)
Number of the port on the module. If you do not specify a
number, all ports on the specified module are shown.