Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
132 Avaya P460 Reference Guide
Example:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
show ip icmp
User level: read-only, read-write, admin.
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
show ip interface
User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface [<interface-name>]|<ip-address>|<vlan>]
show ip arp Display all ARP mapping
show ip arp marketing Display interface ARP mapping
show ip arp 192.168.49.1 Display one host ARP mapping
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show ip arp marketing_vlan Display vlan ARP mapping
show ip arp static Display static ARP mapping
Router-1> show ip icmp
ICMP error messages status is ENABLE
interface-name The name of the interface whose information you
want to display.
ip-address The IP address of the interface whose information
you want to display.
vlan The name or ID of the VLAN over which there are
interfaces you want to display.