Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 121
Example:
show arp-tx-interval
User level: read-only, read-write, admin.
Use the show arp-tx-interval command to display the keep-alive frames
transmission interval.
The syntax for this command is:
show arp-tx-interval
Example:
show boot bank
User level: read-only, read-write, admin.
Use the show boot bank command to display the system boot bank.
The syntax for this command is:
show boot bank
Example:
show broadcast storm control
User level: read-only, read-write, admin.
Use the broadcast storm control command to display broadcast storm status and
P460-1> show arp-aging-interval
ARP table aging interval for gateways was set to 10
minutes.
P460-1> show arp-tx-interval
ARP tx interval for inband interface is set to 5 seconds.
ARP tx interval for outband interface is set to 5 seconds.
P460-1> show boot bank
SPV 1 boot bank is A
SPV 2 boot bank is B