Filter
Top Products
Chapter 2 Avaya P460 CLI Commands
Avaya P460 Reference Guide 179
Example:
show trunk
User level: read-only, read-write, admin.
Use the show trunk command to display VLAN tagging information for the
switch.
The syntax for this command is:
show trunk [<module>[/<port>-<port]]
Example:
Output Fields:
P460-1> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
module
(Optional)
Number of the module. If you do not specify a number, all
modules are shown.
port
(Optional)
Number of the port on the module. If you do not specify a
number, all ports on the specificity module are shown.
You can specify a port range.
P460-1> show trunk 4/1
Port Mode Binding mode Native vlan
----- ----- -------------------- -----------
41/1 off statically bound 1
41/2 dot1q statically bound 2
Field Description
Port Switch and port number(s)
Mode Tag status of the port (dot1q - dot1Q tagging mode,
off - clear mode).
Binding mode Binding mode of the port
Native VLAN Number of the Port VLAN ID (the VLAN to which received
untagged traffic will be assigned).