Filter
Top Products
12-6 Other Special Features Chapter 12
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Program button Setup Summary
The default settings, shown in bold, remain in effect unless you
change them.
PRINT REPORT Sets the Program button to function as a
print transmission report button. When-
ever you need a transmission report for a
document you are sending, just press the
Program button and a transmission report
will print after the document is sent.
REPORT Assigns the Program button to the functions
of the Report button. Whenever you need to
print a report, all you have to do is press
the Program button. This saves you the
effort of opening all three of the One-touch
Speed Dialing panels to press the Report
button.
SCANNING MODE Set up the Resolution, Contrast, or Document
buttons for sending special documents and
then store the settings under the Program
button. The next time you need to set them
before a document transmission, you can
set them with a single button press.
STAMP If you had the optional stamp feature
installed for you, this feature is available. If
you select STAMP you can turn the stamp
feature on and off without opening all
three of the One-touch Speed Dialing
panels to press the Stamp button.