Filter
Top Products
G-4 Glossary
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Document density
The document density settings alter the lightness or darkness of the
documents sent or received. See density control.
Document guides
Guide the document into the fax for scanning, copying, or sending.
Document memory list
The memory list shows what documents are currently stored in the fax
memory. Each memory list shows:
•Transaction number for each document.
• How each document was stored.
• Name and number the fax was sent to if they are registered for One-
touch or Coded Speed Dialing.
• Number of pages in the document.
• Date and time each document was stored in the memory and when it
will be sent.
• Sender’s name (TTI).
Document feeder tray
The document feeder tray can hold 50 sheets of letter- or A4-size paper,
or 20 legal-, 11 × 17 in.- or B4-size paper. You load a document once, and
the fax then feeds each sheet of the document one by one.
Document output tray
Holds documents ejected from the fax unit after they have been scanned
into memory, copied, or sent by direct sending.
Dual access
Enables you to scan a transmission, even if the fax is copying, sending or
receiving a document. You do not have to wait until the fax finishes the
current send/receive transmission. While the facsimile sends a document
from the memory, you can load other documents into the memory, copy
documents, print out reports, or register information.
Dual-line Upgrade Kit II
The optional Dual-line Upgrade Kit II allows you to connect two telephone
lines to the fax unit. Both lines can be used simultaneously for facsimile
transactions, either line can be given priority for transactions, or either line
can be temporarily disabled.