Filter
Top Products
16-18 Summary of Important Settings Chapter 16
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
2.
SELECT REDUCE DIR
Select the direction of reduc-
tion for the percentage of fixed
reduction selected above.
VERTICAL ONLY Reduction performed in the
vertical direction only.
HORIZ & VERTICAL
Reduction performed in the
horizontal and vertical
direction.
5.SELECT DENSITY Adjust the print density of documents you receive.
LT (Light), STD (Standard), DK (Dark)
6.TONER SUPPLY LOW Set the fax to continue printing even after toner runs low
and the Change Cartridge indicator lights and the
REPLACE CARTRIDGE message appears.
RX TO MEMORY Stop printing and receive the remainder of the document
in the memory.
KEEP PRINTING Ignore the warning and keep printing until the document
is completely printed. This setting is convenient when a
new toner cartridge is not at hand. However, even if the
toner cartridge is out of toner, the fax will not receive the
document in the memory. After installing the new toner
cartridge, be sure to set to RX TO MEMORY.