Filter
Top Products
Chapter 8 Using the Memory Features 8-17
Using the
Memory Features
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
Memory Box Setup Summary (Cont'd)
5.RX PASSWORD 0-9,
*
, #, spaces (20 digits)
The ITU-T standard RX password for your memory
box. This password must match the ITU-T password
sent with a document to your fax in order for the
transaction to succeed. If your RX password does not
match the TX password sent with the document from
the other party’s fax, your fax will not receive the
document.
6.RECEIVE Determines whether or not the document is received
in the memory box and how it is received.
NO Documents are not received in the
memory box.
YES Documents are received in the memory
box and you can do some additional
settings to determine how they are
received. If selected, you can turn on
checking the originator, printing the
document, and printing method.
1.SELECT ORIG UNIT Determines whether your fax checks to make sure the
originator of the transmission is registered on your
fax. To be registered on your fax, the originator’s
telephone number must be registered for a One-touch
or Coded Speed Dialing button on your fax unit.
OFF Your fax receives an incoming document
even if the originator is not registered on
your fax.
ON Your fax will receive the document only
if the originator is registered for a One-
Touch or Coded Speed Dialing button
on your fax unit.
TEL = After you turn SELECT ORIG UNIT on,
press the appropriate One-touch Speed
Dialing button or press the Coded Dial
button followed by the appropriate
three-digit code to register the number
of the originator and press Set. In order
to register the originator’s telephone
number, the number must be registered for a
One-touch or Coded Speed Dialing button.