Filter
Top Products
14
Setting the TEL LINE TYPE
See pp. 16, 17 for the buttons on the operation panel.
Dialling through a switchboard (PBX)
A PBX (private branch exchange) is an on-site telephone switchboard.
• If your fax is connected through a switchboard, dial an outside line access number first. Then dial the rest of the
number.
• If you want to dial with automatic dialling, you may have to insert a pause between the outside line number and the
telephone number when you register the number for one-touch or coded speed dialling.
• When the fax is connected to a PBX or other telephone switching system, you can register the access type and
outside access line number under the [R] button (see below). Once you have registered them, you simply need to
press [R] before dialling a fax or telephone number.
Registering the access type and the outside line
access number
See pp. 16, 17 for the buttons on the operation panel.
1 Press [Function], then press [Start/Copy] twice.
2 Use [ ] or [ ] to select <TEL LINE TYPE>, then press [Start/Copy].
3 Use [ ] or [ ] to select the appropriate line type, then press [Start/Copy].
4 Press [Stop].
Setting ends and the fax returns to standby mode.
1 Press [Function], then press [Start/Copy] twice.
2 Use [ ] or [ ] to select <R-KEY SETTING>, then press [Start/Copy].
ROTARY PULSE
PSTN
Thalia.book Page 14 Tuesday, September 28, 2004 10:13 AM